A surgeon hands an instrument to a colleague under the operating light
3D HealTech
Talk to us

Orthopaedic and maxillofacial surgery

Surgery, planned before the first incision.

We turn the patient’s CT into a 3D surgical plan, a guide and a model. Your team walks into the OR with the key decisions already made.

A surgeon at a desk holding a 3D-printed bone model, with the 3D plan on a monitor

In the OR

Decide at the desk. Not on the table.

  1. See the anatomy before you open.
  2. Rehearse on the model. Pre-bend plates there, not on the table.
  3. Let the guide carry the plan to the bone.
  4. Spend OR time operating, not deciding.

A review of published studies reports a mean of 62 minutes saved per operation with 3D-printed models and 23 with guides. Ballard et al., 2020

What we make

Three tools, one plan.

All three start from the same scan: the patient’s own CT.

A 3D-printed surgical guide fitted on a femur

Surgical guides

OsteoGuide

Cutting and drilling guides that carry the planned cuts and drill paths onto the bone.

An anatomical model of a rib cage and spine

Anatomical models

AnatoModel

The patient’s anatomy, printed. Plan on it, pre-bend plates on it, explain the operation with it.

The Andromeda case platform on a workstation, showing a femur with a surgical guide

Case platform

Andromeda

The scan, the 3D plan, comments and approvals for every case in one place.

How it works

From scan to surgery in three steps.

Your part is the scan and the approval. The engineering is ours.

  1. A radiology workstation monitor showing CT scan views of a femur01

    Send the scan

    Upload the CT and tell us which operation you are planning.

  2. An engineer and a surgeon review a 3D plan of a femur and guide on screen02

    Approve the plan

    Our biomedical engineers build the 3D plan with you. You review it, ask for changes and approve.

  3. Gloved hands fit a 3D-printed guide onto a femur model in the operating room03

    Operate with the plan

    The guide and the model are printed and ready before the day of surgery.

A 3D printer in a lab, with printed anatomical models and a CT scan on screen

For hospitals

Your hospital has a 3D lab? Let’s put it to work.

We design and engineer every case. Your lab prints next to the OR, with no outside supplier to wait for.

The 3D HealTech team
A surgeon and an engineer discussing a 3D print at the printer

About us

Engineers who work side by side with surgeons.

We are biomedical engineers and software developers. Every case is planned together with the surgeon who will operate. We started in Belgrade, working with surgeons at the Banjica Institute for Orthopaedic Surgery, and are now opening in Graz.

BelgradeGraz

Contact

Have a case in mind?

Tell us about the operation you are planning. An engineer will get back to you.

office@3dhealtech.comBelgrade and Graz